[. . . ] · Before taking the figure into use, ALWAYS check it for visible damage. Only connect the rope light to electrical mains power when it is in a faultless condition. [. . . ] Do not place furniture or similar items on the power cable and ensure that it cannot become trapped. NEVER tie knots in the power cable and do not bind it with other cables. · Do not place any open sources of fire, such as candles, close to the illuminated figure. · When a storm and/or thunderstorm with the risk of lightening threatens, please disconnect the illuminated figure from mains power. · NEVER allow the figure to light up in its packaging, there is a risk of it overheating!· You may only place the illuminated figure on normal fire-retardant surfaces. · Notice regarding power disconnection: To completely disconnect the device from mains power, the plug MUST be removed from the power socket. For this reason the device should be placed in a position where unobstructed access to the power socket is assured at all times, so that in an emergency you will be able to immediately remove the plug. To eliminate the risk of fire, you should disconnect the plug from the power socket if you do not intend to use the device for an extended period, for example, during a holiday. · Ensure that the power cable to the illuminated figure does not pass through areas where lawnmowers, trimmers, shears or similar cutting instruments might be used. -2- Setting up the illuminated Figure Take the Illuminated Figure from its packaging. Carefully pull the two wire elements apart, on the Christmas tree figure (KH4222) and the Snowman figure (KH4220), so that the figures can stand alone. If necessary, secure the illuminated figures to the ground with the supplied ground spikes. [. . . ] The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. [. . . ]